1 October 2003 Two-dimensional microlens arrays in silica-on-silicon planar lightwave circuit technology
Author Affiliations +
Abstract
Two-dimensional (2-D) microlens arrays have been fabricated with silica-on-silicon planar lightwave circuit (PLC) technology. Several experimental techniques and computer simulation methods are applied to characterize properties of single and double microlens arrays, with one and two refracting surfaces, respectively. Systematic comparison of the measured and simulated beam propagation profiles enables optimization of the lens and module design resulting in higher input-output coupling efficiency. The insertion losses of the lens-slab-lens optical modules with 90-mm-long slab waveguides are measured to be 2.1 and 3.5 dB for the double and single lens modules, respectively. Comprehensive analysis reveals the major loss contributions. Excess losses of the modules caused by variations of the lens curvatures, material refractive indexes, light wavelength, etc., can be controlled within the acceptable limits. Further possibilities for the module loss reduction are discussed. Fairly weak wavelength dependence as well as overall stability of the module properties indicate that the microlens arrays are suitable for dense wavelength division multiplexing (DWDM) photonic networks.
Alexei L. Glebov, Lidu Huang, Shinegori Aoki, Michael Lee, Kishio Yokouchi, "Two-dimensional microlens arrays in silica-on-silicon planar lightwave circuit technology," Journal of Micro/Nanolithography, MEMS, and MOEMS 2(4), (1 October 2003). http://dx.doi.org/10.1117/1.1610481
JOURNAL ARTICLE
10 PAGES


SHARE
KEYWORDS
Beam propagation method

Waveguides

Microlens array

Lens design

Channel waveguides

Photonic integrated circuits

Light wave propagation

Back to Top