1 April 2004 Global critical dimension uniformity improvement for mask fabrication with negative-tone chemically amplified resists by zone-controlled postexposure bake
Author Affiliations +
Abstract
The multizone hotplate approach of the APB5500 bake system achieves temperature uniformity significantly superior to conventional bake tools, resulting in unmatched global critical dimension (CD) uniformity from the postexposure bake (PEB) process. Progress toward 65-nm next-generation lithography, however, requires the application of negative-tone chemically amplified resists (nCARs) like NEB22. This nCAR is characterized to show a strong sensitivity to postexposure delay (PED) in vacuum during electron-beam writing of 0.5 nm/h, and also a strong PEB sensitivity of 7.8 nm/°C, both resulting in systematic CD errors. These CD errors are compensated with the APB5500 bake system during PEB by automatically applying an appropriate nonuniform temperature profile. This temperature profile is calculated by an algorithm considering the resist and mask heat transfer properties. A CD uniformity improvement from 8.9 to 6.7 nm total range (≈25%) on a state of the art production mask is achieved.
© (2004) Society of Photo-Optical Instrumentation Engineers (SPIE)
Lothar Berger, Lothar Berger, Peter Dress, Peter Dress, Thomas M. Gairing, Thomas M. Gairing, Chia-Jen Chen, Chia-Jen Chen, Ren-Guey Hsieh, Ren-Guey Hsieh, Hsin-Chang Lee, Hsin-Chang Lee, Hung-Chang Hsieh, Hung-Chang Hsieh, } "Global critical dimension uniformity improvement for mask fabrication with negative-tone chemically amplified resists by zone-controlled postexposure bake," Journal of Micro/Nanolithography, MEMS, and MOEMS 3(2), (1 April 2004). https://doi.org/10.1117/1.1683338 . Submission:
JOURNAL ARTICLE
9 PAGES


SHARE
RELATED CONTENT


Back to Top