1 October 2005 Refractive micro-optics fabrication with a 1-D binary phase grating mask applicable to MOEMS processing
Author Affiliations +
Abstract
We present a new photomask technology capable of forming a continuous rotationally symmetric microstructure in thick photoresist. This technique eliminates many of the drawbacks of grayscale and half-tone masking technology. A binary phase grating of pi phase depth on a transparent quartz mask plate is fabricated in PMMA resist using an e-beam direct writing technique. When the phase mask is used in the stepper, an analog intensity profile is created on the wafer. The period is constrained, allowing for control of the zero-order in the stepper. The duty cycle of the phase gratings can be varied in such a way to provide the proper analog intensity profile for a wide range of micro-optics on the photoresist. The design, analysis, and fabrication procedures of this technique are discussed. This processing technique can be applied to many MOEMS devices that require refractive elements for optical processing. The method greatly simplifies the device process, reducing the cost and improving the device yield.
©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jinwon Sung, Heidi Hockel, Jeremiah D. Brown, and Eric G. Johnson "Refractive micro-optics fabrication with a 1-D binary phase grating mask applicable to MOEMS processing," Journal of Micro/Nanolithography, MEMS, and MOEMS 4(4), 041603 (1 October 2005). https://doi.org/10.1117/1.2110226
Published: 1 October 2005
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Photomasks

Binary data

Analog electronics

Optical design

Microlens

Photoresist materials

Micro optics

RELATED CONTENT


Back to Top