1 October 2005 Thin-film optimization strategy in high numerical aperture optical lithography, part 2: applications to ArF
Author Affiliations +
Abstract
The methodology of the optimization of a thin-film stack for high-NA optical lithography is different from that of the conventional low-NA case, since there are many new factors that need to be considered simultaneously. These include polarization dependence of the reflection coefficient, impact from variation of the angle of incidence, low energy coupling efficiency at the air/resist interface for TE waves, and critical dimension (CD) variation resulting from the bulk effect. In this work, we show that in the extreme high-NA regime, it is hardly possible with existing materials to realize a perfect top antireflection coating that satisfies simultaneous requirements of minimizing the swing effect as well as maximizing throughput and image contrast. Fortunately, for immersion lithography, it is very probable to realize such a top antireflection coating, even when NA is close to the physical limit. We also show that the impact from variation of the angle of incidence can be overcome by implementing top/bottom antireflection coating optimized at low/high angles of incidence, or vice versa. We finally show that CD variation resulting from the bulk effect can be compensated in half a swing period by fine tuning the swing effect.
©(2005) Society of Photo-Optical Instrumentation Engineers (SPIE)
Shinn-Sheng Yu, Burn Lin, and Anthony Yen "Thin-film optimization strategy in high numerical aperture optical lithography, part 2: applications to ArF," Journal of Micro/Nanolithography, MEMS, and MOEMS 4(4), 043004 (1 October 2005). https://doi.org/10.1117/1.2137987
Published: 1 October 2005
Lens.org Logo
CITATIONS
Cited by 5 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Thin films

Optical lithography

Reflection

Antireflective coatings

Immersion lithography

Refractive index

Critical dimension metrology

Back to Top