1 October 2007 Optical designs of grazing incidence collector for extreme ultraviolet lithography
Author Affiliations +
J. of Micro/Nanolithography, MEMS, and MOEMS, 6(4), 043002 (2007). doi:10.1117/1.2811949
Abstract
Two designs of grazing incidence collectors for extreme ultraviolet (EUV) lithography are described as alternative solutions to the type-I Wolter configuration. The main purposes of the designs are the improvement of collection efficiency and the increase in flexibility with which the design can be adapted and adjusted to the boundary specifications set by the source and the illuminator. With reference to a specific scenario, examples of these designs and their performances are presented, discussed, and compared to what can be achieved with a Wolter collector. In this scenario, one of the designs offers the possibility to achieve large collection efficiency with a limited number of mirrors, as opposed to the Wolter case where high values of the collection efficiency are possible, provided the number of mirrors is increased.
Fabio E. Zocchi, Enrico Benedetti, "Optical designs of grazing incidence collector for extreme ultraviolet lithography," Journal of Micro/Nanolithography, MEMS, and MOEMS 6(4), 043002 (1 October 2007). https://doi.org/10.1117/1.2811949
JOURNAL ARTICLE
7 PAGES


SHARE
RELATED CONTENT


Back to Top