1 April 2008 Charging effects in micromirror spatial light modulators
Author Affiliations +
J. of Micro/Nanolithography, MEMS, and MOEMS, 7(2), 021011 (2008). doi:10.1117/1.2911021
Abstract
We describe charging effects on spatial light modulators (SLM). These light modulators consist of up to one million mirrors that can be addressed individually and are operated at a frame rate of up to 2 kHz. They are used for deep ultraviolet (DUV) mask writing where they have to meet very high requirements with respect to accuracy. To be usable in a mask-writing tool, the chips have to be able to work under DUV light and maintain their performance with high accuracy over a long period of time. Charging effects are a problem frequently encountered with MEMS, especially when they are operated in an analog mode. In this work, the issue of charging effects in SLMs used for microlithography, their causes and methods of their reduction or elimination, by means of addressing methods as well as technological changes, is discussed. The first method deals with the way charges can accumulate within the actuator. It is a simple method that requires no technological changes but cannot always be implemented. The second involves the removal of the materials within the actuator where charges can accumulate.
Ulrike A. Dauderstädt, Peter Duerr, Steffen Sinning, Ingo Wullinger, Michael Wagner, "Charging effects in micromirror spatial light modulators," Journal of Micro/Nanolithography, MEMS, and MOEMS 7(2), 021011 (1 April 2008). http://dx.doi.org/10.1117/1.2911021
JOURNAL ARTICLE
10 PAGES


SHARE
KEYWORDS
Mirrors

Electrodes

Spatial light modulators

Micromirrors

Deep ultraviolet

Oxides

Actuators

RELATED CONTENT

Diamond/Aluminum Interactions That Affect Tool Performance
Proceedings of SPIE (February 13 1987)
Studies on dynamic behavior of rotating mirrors
Proceedings of SPIE (February 10 2005)
All-Optical Big BAM
Proceedings of SPIE (May 03 1988)
Pulsed Laser Deposition Of Amorphous Carbon Films
Proceedings of SPIE (January 15 1989)

Back to Top