Translator Disclaimer
1 July 2008 Fabrication of quartz mold with submicrometer features based on laser-assisted contact transfer method
Author Affiliations +
Abstract
We report a simple method for fabricating quartz molds with submicrometer- and nanoscaled surface structures. It utilizes an excimer laser as the energy source and a roller-type contact-printing setup for directly transferring a patterned metallic thin film from a silicon mold to a quartz substrate. The transferred metallic patterns are subsequently used as an etching mask for dry etching on the quartz plate. Experiments have been carried out to determine the optimal parameters for successful pattern transformation. Experimental results on fabricating quartz molds are presented, and potential applications of this innovative pattern transformation method are addressed.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Yung-Chun Lee, Chun-Hsiang Chen, Cheng-Yu Chiu, and Fuh-Yu Chang "Fabrication of quartz mold with submicrometer features based on laser-assisted contact transfer method," Journal of Micro/Nanolithography, MEMS, and MOEMS 7(3), 033006 (1 July 2008). https://doi.org/10.1117/1.2970146
Published: 1 July 2008
JOURNAL ARTICLE
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Cavity enhanced 1.5 um LED with silicon as a hole...
Proceedings of SPIE (March 07 2016)
Thin film edge emitting lasers integrated onto silicon
Proceedings of SPIE (February 12 2010)
Laser-induced single step micro/nanopatterning
Proceedings of SPIE (November 18 2003)
Excimer laser processing of diamond-like films
Proceedings of SPIE (September 01 1991)

Back to Top