1 July 2008 Lineshape and morphology study of structures formed using a reconfigurable photomasking element
Author Affiliations +
J. of Micro/Nanolithography, MEMS, and MOEMS, 7(3), 033007 (2008). doi:10.1117/1.2970147
Abstract
The proposed application of holographically formed polymer dispersed liquid-crystal (H-PDLC) thin films is a real-time dynamically reconfigurable mask for the resist exposure step in the photolithographic process. An adaptable photomask has advantages over traditional binary masks that include multiple fabrication patterns using a single mask, reduction in realignment error between different masks, real-time correction and adjustment of fabricated structures, and the ability to alter the mask pattern during exposure. H-PDLC films, or thin periodic nanostructures of alternating layers of polymer and liquid crystal, have unique electro-optic properties, including the ability to modulate a particular wavelength as a function of bias applied to the film. Structures formed using the H-PDLC photomask device have been compared to similar structures formed with a static photomask using an optical profilometer. Features studied were decreasing lines with a maximum width of 121 µm to a minimum width of 84 µm. Edge width between structures formed using the H-PDLC mask and static photomask differ by <5%. Additionally, morphology studies have been performed on developed regions of glass and resist formed using a static and an H-PDLC mask to demonstrate that no structural defects exist due to formation under an H-PDLC grating.
Anna E. Fox, Adam K. Fontecchio, "Lineshape and morphology study of structures formed using a reconfigurable photomasking element," Journal of Micro/Nanolithography, MEMS, and MOEMS 7(3), 033007 (1 July 2008). https://doi.org/10.1117/1.2970147
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top