1 July 2008 High-resolution permanent photoresist laminate for microsystem applications
Author Affiliations +
A new permanent dry film photoresist, TMMF S2000, is tested and evaluated for microsystem applications. The resist provides high resolution, high aspect ratios, and homogeneous resist thicknesses. Aspect ratios up to 6:1 (height:width) may be achieved for both structures and channels. Buried structures are created by covering channels with a laminated resist layer. In addition, a very fast direct wafer bonding process is developed. In this process, the resist is patterned on a wafer and directly bonded to a second wafer using pressure and heat. Both techniques enable the fabrication of microfluidic chips with high aspect ratio structures.
© (2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
U. Stohr, U. Stohr, P. Vulto, P. Vulto, P. Hoppe, P. Hoppe, Gerald A. Urban, Gerald A. Urban, Holger Reinecke, Holger Reinecke, } "High-resolution permanent photoresist laminate for microsystem applications," Journal of Micro/Nanolithography, MEMS, and MOEMS 7(3), 033009 (1 July 2008). https://doi.org/10.1117/1.2964217 . Submission:

Back to Top