Translator Disclaimer
1 July 2008 Deep lateral anhydrous HF/methanol etching for MEMS release processes
Author Affiliations +
As demonstrated earlier, gas-phase etching of sacrificial oxide with a vapor mixture of anhydrous HF (AHF) and methanol (CH3OH) offers a clean, stiction-free, effective etching technique for microelectromechanical systems (MEMS) release. The use of AHF/methanol process in MEMS release operations is explored in the deep lateral etching of patterned silicon-on-insulator (SOI) substrates using a 200 mm multiwafer commercial module, which assures adequate process throughput. It was determined that highly selective, with respect to both Si and Si3N4, etching of SiO2 can be accomplished by controlling pressure and wafer temperature. It was also observed that the vertical etch rates for both the AHF/methanol and the HF: H2O solution was higher than the rates of lateral etches in confined geometries. Furthermore, the AHF/methanol and 1:10 HF: H2O etch chemistries were directly compared in releasing silicon cantilevers up to 500 µm in length and a significantly faster, stiction-free process was observed in the former case. Adequate process reproducibility from wafer to wafer as well uniformity across the wafer was demonstrated.
©(2008) Society of Photo-Optical Instrumentation Engineers (SPIE)
Meltem Erdamar, Karthikeyan Shanmugasundaram, Paul Roman, Paul Mumbauer, Maria Klimkiewicz, and Jerzy Ruzyllo "Deep lateral anhydrous HF/methanol etching for MEMS release processes," Journal of Micro/Nanolithography, MEMS, and MOEMS 7(3), 033014 (1 July 2008).
Published: 1 July 2008

Back to Top