1 April 2009 Development of 2.4-GHz film bulk acoustic wave filter for wireless communication
Author Affiliations +
Abstract
This research shows the realization of 2.4-GHz film bulk acoustic wave (FBAW) filters. The design, simulation, fabrication, measurement, and analysis of the film bulk acoustic wave resonator (FBAR) devices are covered, which is helpful for the manufacture of the FBAR devices. The simulation of the FBAR and RF circuitry can be integrated on a single platform. The fabrication of the FBAW filters is compatible with complementary metal-oxide semiconductors. This device can be used in 2.4-GHz bandpass filters, such as 802.11b/g and Bluetooth. In this research, the 2.4-GHz FBAW filters for wireless communication have been accomplished. The fabricated FBAW filters have insertion loss of −10 dB, return loss of −7 dB, and stopband rejection of −25 dB, central frequency of 2.485 GHz, bandwidth of 60 MHz, and size of 0.5 mm×0.5 mm.
© (2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Chi-Ming Fang, Chi-Ming Fang, Shih-Yung Pao, Shih-Yung Pao, Chi-Yuan Lee, Chi-Yuan Lee, Yi-Chang Lu, Yi-Chang Lu, Pei-Yen Chen, Pei-Yen Chen, Yung-Chung Chin, Yung-Chung Chin, Pei-Zen Chang, Pei-Zen Chang, } "Development of 2.4-GHz film bulk acoustic wave filter for wireless communication," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(2), 021121 (1 April 2009). https://doi.org/10.1117/1.3094749 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
RELATED CONTENT

The characteristics of LTCC RF switch modules for GSM band
Proceedings of SPIE (February 22 2005)
Finite element simulations of stacked crystal filters
Proceedings of SPIE (March 29 2004)
2.5-MHz 2D array with z-axis backing
Proceedings of SPIE (April 09 1997)
Simulation of reflective arrays for SAW resonators
Proceedings of SPIE (September 23 1999)

Back to Top