1 July 2009 Large-size P-type silicon microchannel plates prepared by photoelectrochemical etching
Author Affiliations +
Abstract
The influence of backside illumination and temperature on the fabrication of large and high aspect ratio silicon microchannel plates (MCPs) by photoelectrochemical (PEC) process is described. Backside illumination is provided by three 150-W tungsten halogen lamps with a feedback loop, keeping a constant current density. The etching temperature is maintained by a circulation system. Proper backside illumination and the lower temperature can provide better integrated etching conditions compared to that without illumination and temperature control. Etching under the improved conditions results in smoother undercutting and better surface topography for large (effective diameter of about 80 mm for 4-inch silicon substrates) silicon microchannel plates. Enhancing the backside illumination within the etching temperature range ensures that the aspect ratio is more than 40, boding well for applications of silicon microchannel plates.
© (2009) Society of Photo-Optical Instrumentation Engineers (SPIE)
Ding Yuan, Ding Yuan, Pengliang Ci, Pengliang Ci, Fei Tian, Fei Tian, Jing Shi, Jing Shi, Shaohui Xu, Shaohui Xu, Peisheng Xin, Peisheng Xin, Lianwei Wang, Lianwei Wang, Paul K. Chu, Paul K. Chu, } "Large-size P-type silicon microchannel plates prepared by photoelectrochemical etching," Journal of Micro/Nanolithography, MEMS, and MOEMS 8(3), 033012 (1 July 2009). https://doi.org/10.1117/1.3158616 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
Back to Top