Translator Disclaimer
1 October 2010 Mueller matrix measurement of asymmetric gratings
Author Affiliations +
Scatterometry has been used extensively for the characterization of critical dimensions (CDs) and detailed sidewall profiles of periodic structures in microelectronics fabrication processes. In most cases devices are designed to be symmetric, although errors could occur during the fabrication process and result in undesired asymmetry. Conventional optical scatterometry techniques have difficulties distinguishing between left and right asymmetries. We investigate the possibility of measuring grating asymmetry with Mueller matrix spectroscopic ellipsometry (MM-SE) for a patterned hard disk sample prepared by a nanoimprint technique. The relief image on the disk sometimes has an asymmetrical sidewall profile, presumably due to the uneven separation of the template from the disk. Cross section SEM reveals that asymmetrical resist lines are typically tilted toward the outer diameter direction. Simulation and experimental data show that certain Mueller matrix elements are proportional to the direction and amplitude of profile asymmetry, providing a direct indication to the sidewall tilting. The tilting parameter can be extracted using rigorous optical critical dimension (OCD) modeling or calibration methods. We demonstrate that this technique has good sensitivity for measuring and distinguishing left and right asymmetry caused by sidewall tilting, and can therefore be used for monitoring processes for which symmetric structures are desired.
©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Jie Li, Justin J. Hwu, Yongdong Liu, Silvio Rabello, Zhuan Liu, and Jiangtao Hu "Mueller matrix measurement of asymmetric gratings," Journal of Micro/Nanolithography, MEMS, and MOEMS 9(4), 041305 (1 October 2010).
Published: 1 October 2010

Back to Top