1 January 2011 Photonic crystal slab waveguide-based infiltrated liquid sensors: design and analysis
Author Affiliations +
Infiltrated liquid sensors based on a 2D photonic crystal waveguide were devised. This waveguide is designed by taking into account lowering of the radius of the central air holes in a single row and the optical resonance shifts due to refractive index change of these holes by selectively filling with different liquids. The transmission spectrum of the infiltrated liquid sensor was obtained with the use of a finite difference time domain method. At the working wavelength of 1550 nm, the waveguide mode gap edge shifts with sensitivity of 200 nm per refractive index unit. The mode gap shifts are consistent with dispersion diagrams.
© 2011 Society of Photo-Optical Instrumentation Engineers (SPIE)
Shruti Singh, Shruti Singh, Ravindra K. Sinha, Ravindra K. Sinha, Ragunath Bhattacharyya, Ragunath Bhattacharyya, } "Photonic crystal slab waveguide-based infiltrated liquid sensors: design and analysis," Journal of Nanophotonics 5(1), 053505 (1 January 2011). https://doi.org/10.1117/1.3574182 . Submission:


Photonic crystal waveguide based sensors
Proceedings of SPIE (February 28 2011)
A fluid sensor based on a sub terahertz photonic crystal...
Proceedings of SPIE (February 02 2007)
Microfluidic photonic crystal nanocavities
Proceedings of SPIE (January 08 2008)
The effect of different medium in air holes on photonic...
Proceedings of SPIE (February 13 2005)

Back to Top