8 January 2015 Optimization of structure parameters of concentric plasmonic lens for 355 nm radially polarized illumination
Author Affiliations +
Abstract
We propose and optimize two designs of plasmonic lens structures, concentric grooves with a central hole (CGH) and concentric grooves with a central pillar (CGP), based on a traditional structure of concentric grooves (CG). The numerical investigation based on COMSOL Multiphysics is performed to optimize the three kinds of structures by a 355 nm radially polarized laser illumination. It is found that full-width at half maximum (FWHM) is closely related to the size of the center-position, and the field enhancement effect depends on the resonant wavelength of surface plasmon polaritons, permittivity, film thickness, and groove number. Compared to a FWHM of λ/3 (λ is the wavelength of the laser beam) with the conventional CG type, the combination of localized and extended surface plasmons results in CGP and CGH parameters achieving their optimal value with a much smaller spot size of λ/8 and higher intensity enhancement for a variety of the aspect ratios of central pillar and hole. A focused ion beam was used to fabricate the three type nanostructures with high accuracy. The CGH type with a central hole 20.88 nm in diameter and the CGP type with a central pillar 55.45 nm in diameter have been successfully fabricated approximately to their optimization results.
© 2015 Society of Photo-Optical Instrumentation Engineers (SPIE)
Jiaxin Ji, Jiaxin Ji, Yonggang Meng, Yonggang Meng, Jun Zhang, Jun Zhang, } "Optimization of structure parameters of concentric plasmonic lens for 355 nm radially polarized illumination," Journal of Nanophotonics 9(1), 093794 (8 January 2015). https://doi.org/10.1117/1.JNP.9.093794 . Submission:
JOURNAL ARTICLE
10 PAGES


SHARE
RELATED CONTENT

Periodicity effects on compound guided waves
Proceedings of SPIE (September 25 2016)
Cavity-enhanced magneto-plasmonic effects
Proceedings of SPIE (October 08 2012)

Back to Top