Photodegradation in a stress and response framework: poly(methyl methacrylate) for solar mirrors and lens

Myles P. Murray; Laura S. Bruckman; Roger H. French

doi:10.1117/1.JPE.2.022004

19 November 2012 Photodegradation in a stress and response framework: poly(methyl methacrylate) for solar mirrors and lens

Myles P. Murray, Laura S. Bruckman, Roger H. French

Author Affiliations +

Journal of Photonics for Energy, Vol. 2, Issue 1, 022004 (November 2012). https://doi.org/10.1117/1.JPE.2.022004

Abstract

In the development of materials for enhanced photovoltaic (PV) performance, it is critical to have quantitative knowledge of both their initial performance and their performance over the required 25-year warranted lifetime of the PV system. Lifetime and degradation science, based on an environmental stress and response framework, is being developed to link the intensity and net stress to which materials, components, and systems are exposed to the responses observed and their subsequent degradation and damage accumulation over the lifetime. Induced absorbance to dose (IAD), a metric developed for solar radiation durability studies of solar and environmentally exposed materials, is defined as the rate of photodarkening or photobleaching of a material as a function of radiation dose. Quantitative degradation rates like IAD, determined over a wide range of stress intensities and net stresses, have the potential to predict degradation, failure, and power loss rates in photovoltaic systems over time caused by damage accumulation. Two grades of poly(methyl methacrylate) were exposed and evaluated in two cases of high-intensity ultraviolet exposures. A three- to six-fold increase in photodarkening was observed for one acrylic formulation when exposed to UVA-340 light when compared with concentrated xenon-arc exposure. The other, more highly stabilized acrylic formulation, showed up to three times more photodarkening in the same exposure.

Citation Download Citation

Myles P. Murray, Laura S. Bruckman, and Roger H. French "Photodegradation in a stress and response framework: poly(methyl methacrylate) for solar mirrors and lens," Journal of Photonics for Energy 2(1), 022004 (19 November 2012). https://doi.org/10.1117/1.JPE.2.022004

Published: 19 November 2012

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available