16 January 2018 Comparative study on deposition of fluorine-doped tin dioxide thin films by conventional and ultrasonic spray pyrolysis methods for dye-sensitized solar modules
Author Affiliations +
Abstract
Fluorine-doped tin dioxide (FTO) thin films were produced via conventional spray pyrolysis and ultrasonic spray pyrolysis (USP) methods using alcohol-based solutions. The prepared films were compared in terms of crystal structure, morphology, surface roughness, visible light transmittance, and electronic properties. Upon investigation of the grain structures and morphologies, the films prepared using ultrasonic spray method provided relatively larger grains and due to this condition, carrier mobilities of these films exhibited slightly higher values. Dye-sensitized solar cells and 10 × 10    cm modules were prepared using commercially available and USP-deposited FTO/glass substrates, and solar performances were compared. It is observed that there exists no remarkable efficiency difference for both cells and modules, where module efficiency of the USP-deposited FTO glass substrates is 3.06% compared to commercial substrate giving 2.85% under identical conditions. We demonstrated that USP deposition is a low cost and versatile method of depositing commercial quality FTO thin films on large substrates employed in large area dye-sensitized solar modules or other thin film technologies.
© 2018 Society of Photo-Optical Instrumentation Engineers (SPIE)
Kerem Cagatay Icli, Kerem Cagatay Icli, Bahadir Can Kocaoglu, Bahadir Can Kocaoglu, Macit Ozenbas, Macit Ozenbas, } "Comparative study on deposition of fluorine-doped tin dioxide thin films by conventional and ultrasonic spray pyrolysis methods for dye-sensitized solar modules," Journal of Photonics for Energy 8(1), 015501 (16 January 2018). https://doi.org/10.1117/1.JPE.8.015501 . Submission: Received: 16 August 2017; Accepted: 21 December 2017
Received: 16 August 2017; Accepted: 21 December 2017; Published: 16 January 2018
JOURNAL ARTICLE
14 PAGES


SHARE
Back to Top