Influence of sampling on target recognition and identification

Richard H. Vollmerhausen; Ronald G. Driggers; Barbara L. O'Kane

doi:10.1117/1.602043

1 May 1999 Influence of sampling on target recognition and identification

Richard H. Vollmerhausen, Ronald G. Driggers, Barbara L. O'Kane

Optical Engineering, Vol. 38, Issue 5, (May 1999). https://doi.org/10.1117/1.602043

Two perception experiments are conducted to quantify the relationship between imager sampling artifacts and target recognition and identification performance using that imager. The results of these experiments show that in-band aliasing (aliasing that overlaps the baseband signal) does not degrade target identification performance, but out- of-band aliasing (such as visible display raster) degrades identification performance significantly. Aliasing had less impact on the recognition task than the identification task, but both in-band and out-of-band aliasing moderately degrades recognition performance. Based on these experiments and other results reported in the literature, it appears that in-band aliasing has a strong effect on low-level discrimination tasks such as point (hot-spot) detection; out-of-band aliasing has only a minor impact on these tasks. For high-level discrimination tasks such as target identification, however, out-of-band aliasing has a significant impact on performance, whereas in-band aliasing has a minor affect. For intermediate-level discrimination tasks such as target recognition, both in-band and out-of-band aliasing have a moderate impact on performance. Based on data from the perception experiments, the modulation transferfunction (MTF) squeeze model is developed. The degraded performance due to undersampling is modeled as an effective increase in system blur or, equivalently, a contraction or "squeeze" in the MTF. An equation is developed that quantifies the amount of MTF squeeze or contraction to apply to the system MTF to account for the performance degradation caused by sampling.

Citation Download Citation

Richard H. Vollmerhausen, Ronald G. Driggers, and Barbara L. O'Kane "Influence of sampling on target recognition and identification," Optical Engineering 38(5), (1 May 1999). https://doi.org/10.1117/1.602043

Published: 1 May 1999

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available