1 July 2000 Conformal dome correction with counterrotating phase plates
Scott W. Sparrold, James P. Mills, David J. Knapp, Kenneth S. Ellis, Thomas A. Mitchell, Paul K. Manhart
Author Affiliations +
Windows and domes that are shaped to aerodynamic requirements can increase range and speed for the host platform. This class of optical systems is referred to as conformal optics. The solution discussed here is intended for conformal missile systems having gimbals that point the optical line of sight through different parts of the dome. A conformal dome induces large amounts of varying aberration, tens to hundreds of waves across gimbal angle, and therefore requires dynamic correction. Space is very constricted in missile sensors, and it is therefore highly desirable to limit the number of motors used for aberration correction. This paper describes the performance of a new class of optical systems that employ counterrotating phase prisms to correct conformal dome aberrations while gimbaling the optical system. The phase surfaces on the prisms are described by Zernike circular polynomials. Since the shear across the phase surfaces is rotational, the only aberrations that are generated are those without rotational symmetry, such as tilt, coma, or astigmatism. Using this approach, CODE V® was used to analyze and design a compact, high-performance conformal optical system.
Scott W. Sparrold, James P. Mills, David J. Knapp, Kenneth S. Ellis, Thomas A. Mitchell, and Paul K. Manhart "Conformal dome correction with counterrotating phase plates," Optical Engineering 39(7), (1 July 2000). https://doi.org/10.1117/1.602564
Published: 1 July 2000
Lens.org Logo
CITATIONS
Cited by 18 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Monochromatic aberrations

Domes

Prisms

Zernike polynomials

Missiles

Optical engineering

Aberration correction

RELATED CONTENT

Aberrations of optical domes
Proceedings of SPIE (September 21 1998)
Image plane tilt in optical systems
Proceedings of SPIE (December 01 1991)
The research of conformal optical design
Proceedings of SPIE (August 04 2009)

Back to Top