1 February 2010 Optical evanescent field waveguide Bragg grating pressure sensor
Xiaoli Dai, Stephen J. Mihailov, Chantal Blanchetiere
Author Affiliations +
Abstract
A ridge waveguide Bragg grating pressure or touch sensor is proposed. The sensor consists of an open-top ridge waveguide Bragg grating with an overlaid pressure sensing polydimethylsiloxane film. The effective index of the guided mode of the waveguide is changed by stress-induced variations in the film refractive index that are caused by increases in pressure normal to the waveguide. Pressure is then measured by monitoring the shift of the Bragg resonance resulting from the changes to the effective index. By using the smaller core size ridge waveguide, and a polymer with smaller Young's modulus, the sensitivity of the sensor is enhanced. By utilizing the polarization dependence of the sensor response, a temperature-independent pressure sensor can be realized.
©(2010) Society of Photo-Optical Instrumentation Engineers (SPIE)
Xiaoli Dai, Stephen J. Mihailov, and Chantal Blanchetiere "Optical evanescent field waveguide Bragg grating pressure sensor," Optical Engineering 49(2), 024401 (1 February 2010). https://doi.org/10.1117/1.3319819
Published: 1 February 2010
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Waveguides

Sensors

Fiber Bragg gratings

Refractive index

Polymers

Polymer multimode waveguides

Cladding

RELATED CONTENT


Back to Top