1 May 2011 Developmental long-trace profiler using optimally aligned mirror-based pentaprism
Author Affiliations +
Abstract
A low-budget surface slope-measuring instrument, the developmental long-trace profiler (DLTP), was recently brought into operation at the Advanced Light Source Optical Metrology Laboratory. The instrument is based on a precisely calibrated autocollimator and a movable pentaprism. The capability of the DLTP to achieve submicroradian surface slope metrology has been verified via cross-comparison measurements to other high-performance slope-measuring instruments when measuring the same high-quality test optics. Further improvement of the DLTP is achieved by replacing the existing bulk pentaprism with a specially designed mirror-based pentaprism, which offers the possibility to eliminate systematic errors introduced by inhomogeneity of the optical material and fabrication imperfections of a bulk pentaprism. We provide the details of the mirror-based pentaprism design and describe an original experimental procedure for precision mutual alignment of the mirrors. The algorithm of the alignment procedure and its efficiency are verified with rigorous ray-tracing simulations. Results of measurements of a spherically curved test mirror and a flat test mirror using the original bulk pentaprism are compared to measurements using the new mirror-based pentaprism, demonstrating the improved performance.
©(2011) Society of Photo-Optical Instrumentation Engineers (SPIE)
Samuel K. Barber, Gregory Y. Morrison, Valeriy V. Yashchuk, Mikhail V. Gubarev, Ralf D. Geckeler, Jana Buchheim, Frank Siewert, and Thomas Zeschke "Developmental long-trace profiler using optimally aligned mirror-based pentaprism," Optical Engineering 50(5), 053601 (1 May 2011). https://doi.org/10.1117/1.3572113
Published: 1 May 2011
Lens.org Logo
CITATIONS
Cited by 35 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Mirrors

Autocollimators

Alignment procedures

Optical alignment

Kinematics

Error analysis

Optical engineering

Back to Top