Open Access
12 November 2013 Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing
Wenqiang Peng, Shengyi Li, Chaoliang Guan, Xinmin Shen, Yifan Dail, Zhuo Wang
Author Affiliations +
Abstract
This article [Opt. Eng.. 52, (4 ), 043401 (2013)] was originally published on 15 April 2013 with an error on page 6, Sec. 4, paragraph 2. The first sentence “Figure 8 shows the AFM image of surface microstructure images of 10×10  μm on the silica glass surface…” has been corrected to read “Figure 8 shows the AFM image of surface microstructure images of 5×5  μm on the silica glass surface…”

This article [Opt. Eng. 52(4), 043401 (2013)] was originally published on 15 April 2013 with an error on page 6, Sec. 4, paragraph 2. The first sentence “Figure 8 shows the AFM image of surface microstructure images of 10×10μm on the silica glass surface…” has been corrected to read “Figure 8 shows the AFM image of surface microstructure images of 5×5μm on the silica glass surface…”

The paper was corrected online on 7 November 2013.

© The Authors. Published by SPIE under a Creative Commons Attribution 3.0 Unported License. Distribution or reproduction of this work in whole or in part requires full attribution of the original publication, including its DOI.
Wenqiang Peng, Shengyi Li, Chaoliang Guan, Xinmin Shen, Yifan Dail, and Zhuo Wang "Errata: Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing," Optical Engineering 52(11), 119801 (12 November 2013). https://doi.org/10.1117/1.OE.52.11.119801
Published: 12 November 2013
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Surface finishing

Magnetorheological finishing

Nanoparticles

Polishing

Atomic force microscopy

Glasses

Silica

Back to Top