7 December 2016 Design of electro-optic photonic crystal structure for subdiffraction imaging over the entire visible wavelength range
Author Affiliations +
Abstract
A photonic crystal (PhC)-based structure is designed to achieve subdiffraction imaging over the entire visible wavelength range. The designed structure is a two-dimensional triangular lattice PhC formed by making circular holes in a 100-nm film of electro-optic lithium niobate (LiNbO3) grown on indium tin oxide. The analysis is done by using MEEP and MPB softwares. This shows that by applying a voltage within ±460  V, equal frequency contour can be obtained for specific values of frequencies, which corresponds to wavelength (λ) in visible range (389 to 757 nm). This indicates that the designed structure will have effective negative refraction and hence subdiffraction imaging over the entire visible wavelength (frequency) range. By placing this type of PhC structure in front of the objective, the resolution of the conventional imaging system can be increased.
© 2016 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2016/$25.00 © 2016 SPIE
Rajib Ghosh, K. K. Ghosh, and Rajib Chakraborty "Design of electro-optic photonic crystal structure for subdiffraction imaging over the entire visible wavelength range," Optical Engineering 55(12), 127101 (7 December 2016). https://doi.org/10.1117/1.OE.55.12.127101
Published: 7 December 2016
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electro optics

Electro optical design

Refractive index

Photonic crystals

Superlenses

Structural design

Negative refraction

RELATED CONTENT

Stacked double-layer nanomembrane Fano modulators
Proceedings of SPIE (March 14 2016)
Enhanced electro-optic effect in silicon
Proceedings of SPIE (February 09 2007)
Fresnel zone lenses for an electro optical 2 x 2...
Proceedings of SPIE (April 20 1995)

Back to Top