6 April 2019 Light emitting diode positioning system based on a lamp stripe
Huichao Lv, Lihui Feng, Aiying Yang, Bo Lin, Heqing Huang, Shufen Chen
Author Affiliations +
Abstract
Because traditional indoor locations of visible light usually need improvement in terms of the lighting environment and changes to the layout of light emitting diodes (LEDs), we propose a method that uses a lamp stripe mounted to the wall to send signals and uses an iterative method to estimate the distance between the photodetector (PD) and the lamp stripe, then the position of PD is obtained by geometric method. This method can adjust the position of PD without changing the original lighting layout, thus greatly reducing the workload of changing the layout of LEDs in traditional indoor visible light positioning methods. A positioning accuracy of 0.12 m is obtained in a 2  m  ×  2  m area. This method can be used in some applications that require only two-dimensional positioning, such as sweeping robots and automated guided vehicles.
© 2019 Society of Photo-Optical Instrumentation Engineers (SPIE) 0091-3286/2019/$25.00 © 2019 SPIE
Huichao Lv, Lihui Feng, Aiying Yang, Bo Lin, Heqing Huang, and Shufen Chen "Light emitting diode positioning system based on a lamp stripe," Optical Engineering 58(4), 046103 (6 April 2019). https://doi.org/10.1117/1.OE.58.4.046103
Received: 5 November 2018; Accepted: 14 March 2019; Published: 6 April 2019
Lens.org Logo
CITATIONS
Cited by 1 scholarly publication and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Light emitting diodes

Sensors

Lamps

Visible radiation

Modulation

Robots

Signal detection

Back to Top