1 April 1974 Application of a Lock-in Amplifier for Detecting Nanosecond Dye Laser Pulses
Author Affiliations +
The nitrogen-laser-pumped dye laser produces pulses of 2-8 nanoseconds in duration at repetition rates currently up to 500 pulses per second. With such a low duty cycle system, box-car analyzers are often used to amplify the signal from the photodetector. Except for some of the newer, ultra high-speed models, the box-car does not yield information as to pulse shape The technique to be described utilizes the more commonly available, and less expensive lock-in amplifier to measure light pulses. It will be shown that the signal derived with the lock-in is proportional to the total energy per pulse of the incident light. The technology employed to record oscillograms of these short duration pulses using regular side-on and end-on photomultiplier tubes is also discussed.
Elliot F. Wyner, Elliot F. Wyner, John A. Sousa, John A. Sousa, Joseph F. Roach, Joseph F. Roach, } "Application of a Lock-in Amplifier for Detecting Nanosecond Dye Laser Pulses," Optical Engineering 13(2), 132154 (1 April 1974). https://doi.org/10.1117/12.7971690 . Submission:


New method to characterize Gaussian beams
Proceedings of SPIE (October 25 2011)
Design and construction of a photon counting system
Proceedings of SPIE (May 14 2007)
Photon Counting Techniques
Proceedings of SPIE (February 18 1982)
Airborne UV photon-counting radiometer
Proceedings of SPIE (November 02 2000)
The Photomultiplier As A Versatile Light Detector
Proceedings of SPIE (February 18 1982)

Back to Top