1 April 1975 New Developments in Optical Fabrication Techniques
Author Affiliations +
Abstract
Because of the demand for better performance in optical systems, there is a continuing effort to find more efficient ways of producing optics. Perkin-Elmer's involvement in developing new techniques for the fabrication of aspheric and flat surfaces has resulted in the generation of three machining methods: (1) computer-controlled polishing of aspheric surfaces, (2) continuous polishing of flat surfaces, and (3) single-point diamond tool machining of spheres and flats by means of the Precision Surface Generator. Optical flats larger than 20 inches in diameter have been produced that are flat to better than A /8 peak to valley. The Precision Surface Generator has successfully produced metal mirrors of aluminum, copper, and brass.
R. R. Rigby, "New Developments in Optical Fabrication Techniques," Optical Engineering 14(2), 142145 (1 April 1975). https://doi.org/10.1117/12.7978745 . Submission:
JOURNAL ARTICLE
4 PAGES


SHARE
RELATED CONTENT

Polishing And Aspherizing A 1.8-m f/2.7 Paraboloid
Proceedings of SPIE (January 29 1989)
Precision Machining Vs Optical Process
Proceedings of SPIE (September 25 1979)
Long-Wavelength Interferometer In The Optical Shop
Proceedings of SPIE (December 25 1979)
Traditions Of Optical Fabrication
Proceedings of SPIE (May 03 1982)

Back to Top