1 August 1977 Applications of Diamond Turning to Infrared Optical Systems
Author Affiliations +
Abstract
Diamond turning is immediately applicable to the fabrication of infrared optical components because presently available machines can meet the reduced absolute accuracies required at 10 micrometers. An initial survey of infrared sensor programs at the Honeywell Radiation Center has been conducted to predict the near term and future demand for diamond-turned optical components. Not only does the fabrication process promise significant cost savings as compared to conventional lapping and polishing methods, but, as in the case of aspheric lenses, wider applications are also sought to reduce weight and space requirements. In addition, broader usage of diamond-turned aspherics reduces total parts count and assembly and alignment time, provided proper tools and test equipment are employed. The potential cost savings of diamond-turned vs conventionally fabricated optics are summarized for contracts at the Radiation Center. The savings were calculated by subtracting the difference in fabrication costs and multiplying by the number of items expected to be produced into the mid-1980s. Technical fallout potential of the diamond-turning process is also noted in the apparent ability of a coated sample to pass a 24-hour salt fog test.
Floyd E. Johnson, Theodore T. Saito, "Applications of Diamond Turning to Infrared Optical Systems," Optical Engineering 16(4), 164387 (1 August 1977). https://doi.org/10.1117/12.7972057 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
Back to Top