1 August 1978 Photoconductor-Thermoplastic Image Transducer
Author Affiliations +
Abstract
The photoconductor-thermoplastic, or photoplastic, recording medium can serve as an incoherent-to-coherent transducer to insert data into a coherent optical processor in real time. The photoplastic transducer is characterized by good exposure sensitivity, high resolution, and simple construction, and it is well suited to applications requiring image retention before and during readout. In our investigations we measured exposure sensitivities of less than 50 ergs/cm2 , and achieved a write cycle of charge, expose, and develop in less than 10 msec. Because of the band-pass nature of the recording medium, a spatial frequency offset was provided by overlaying the image with a grating. Images were recorded with incoherent light and read out with coherent light with good fidelity, and the transducer was tested as the input to a matched filter processor.
W. S. Colburn, W. S. Colburn, B. J. Chang, B. J. Chang, } "Photoconductor-Thermoplastic Image Transducer," Optical Engineering 17(4), 174334 (1 August 1978). https://doi.org/10.1117/12.7972241 . Submission:
JOURNAL ARTICLE
10 PAGES


SHARE
RELATED CONTENT

Logarithmic phase filter to extend the depth of field of...
Proceedings of SPIE (November 12 2001)
Merging Images Through Pattern Decomposition
Proceedings of SPIE (December 18 1985)
Application of the ImSyn processor to acoustic tomography
Proceedings of SPIE (August 27 1995)
Multiscale image contrast amplification (MUSICA)
Proceedings of SPIE (May 10 1994)
Representative image thumbnails: automatic and manual
Proceedings of SPIE (February 18 2008)
Simplified method of estimating noise-power spectra
Proceedings of SPIE (July 23 1998)

Back to Top