1 February 1981 Absolute Distance Interferometry
Author Affiliations +
Abstract
A basis for making absolute distance measurements to an accuracy of 0.025 pm over 0-1.5 m intervals is reported. Extensions of this technology will permit distances of 50 m and greater to be measured to the same accuracy. Two-color, synthetic Michelson interferometry using a CO2 laser source capa-ble of generating four sets of R- and P-line pairs is employed. This allows reduction of the very large ambiguity exhibited by conventional Michelson interferometers as well as the resolution of difficulties which would otherwise arise due to instabilities in the measurement arm of the interferometer. This latter effect is a practical rather than a fundamental consideration, but is nonetheless important if the interferometer is to emerge from the laboratory as an effective, workable instrument. Distance is determined in terms of a denumerable number of precisely known wavelengths and fractions thereof.
C. W. Gillard, C. W. Gillard, N. E. Buholz, N. E. Buholz, D. W. Ridder, D. W. Ridder, } "Absolute Distance Interferometry," Optical Engineering 20(1), 201129 (1 February 1981). https://doi.org/10.1117/12.7972676 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
RELATED CONTENT

Absolute Distance Interferometry
Proceedings of SPIE (August 14 1980)
SIM configuration trades
Proceedings of SPIE (July 23 1998)
Noncoherent light interferometry as a thickness gauge
Proceedings of SPIE (January 10 1999)

Back to Top