1 April 1981 Lens Barrel Optomechanical Design Principles
Author Affiliations +
Abstract
It is the task of an optomechanical engineer, starting with a lens design provided by the optical designer, to devise a structure which holds various components of a lens in proper axial and radial alignment. This structure, the lens barrel, must provide a means of interfacing with the customer's system, and must be designed so as to maintain optical and mechanical integrity under a multitude of environmental conditions. This discussion encompasses the design and analysis efforts undertaken by the optomechanical engineer to comply with this requirement. Additionally, some special areas of concern to the optomechanical engineer such as various centration and assembly techniques, cementing of optical components, sealing and leak rate analyses, and reliability estimates of lens assemblies are discussed.
Mete Bayar, "Lens Barrel Optomechanical Design Principles," Optical Engineering 20(2), 202181 (1 April 1981). https://doi.org/10.1117/12.7972687 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
RELATED CONTENT

Smart and precise alignment of optical systems
Proceedings of SPIE (October 15 2013)
Building blocks for optical CIM
Proceedings of SPIE (December 10 1992)
Hughes Danbury technology transfer program
Proceedings of SPIE (October 13 1995)
Mechanical Design Aspects Of Optomechanical Engineering
Proceedings of SPIE (November 29 1979)

Back to Top