1 April 1981 Optical Techniques For Increasing Image Width In Cylindrical Holographic Stereograms
Author Affiliations +
The image width in cylindrical holographic stereograms has been limited to about one-third the diameter of the display drum. An analysis of the optical system shows that producing an image which fills two-thirds of the drum diameter or more requires a cylindrical lens with an f/number of 0.5 or smaller. Cylindrical lenses of such small f/number and adequate optical quality are not commonly available. These optical characteristics can be achieved readily, however, with a holographic element on a curved surface. A system designed for increasing image width making use of such a holographic lens is described. The requirement for an extremely low f/number cylindrical lens can be eliminated by another technique which involves curving the holographic film over a short radius platen. This technique is also described. It is shown that both these techniques compensate the nonlinear horizontal magnification distortion in cylindrical holographic stereograms.
Lloyd Huff, Lloyd Huff, Richard L. Fusek, Richard L. Fusek, } "Optical Techniques For Increasing Image Width In Cylindrical Holographic Stereograms," Optical Engineering 20(2), 202241 (1 April 1981). https://doi.org/10.1117/12.7972698 . Submission:

Back to Top