1 April 1982 Veiling Glare In Photographic Systems
Author Affiliations +
Abstract
This paper presents veiling glare of various types of current lenses-wide angle, standard, telephoto, and zoom; introduces the effect of reflection in camera bodies; and proposes criteria for the assessment of veiling glare. Veiling glare does not differ significantly with focal lengths of lenses, but differs appreciably between manufacturers: less than 1% to more than 10%. The increase in veiling glare due to the reflection in a camera body differs with manufacturers: less than 1% to several percent. According to the results of comparison of the measured veiling glare values with actual pictures taken by lens-and-camera systems under test, the following criteria correspond very well to the actual photographic performance: veiling glare of not more than 1.5%, very good; between 1.5% and 3%, usually good; between 3% and 6%, usually poor, more than 6%, poor.
H ideki Kondo, Yasuhiro Chiba, Takashi Yoshida, "Veiling Glare In Photographic Systems," Optical Engineering 21(2), 212343 (1 April 1982). https://doi.org/10.1117/12.7972906 . Submission:
JOURNAL ARTICLE
4 PAGES


SHARE
RELATED CONTENT

Immersive stereoscopic panoramas
Proceedings of SPIE (March 12 2013)
Extreme retrofocus zoom lens for single shot single lens HDR...
Proceedings of SPIE (September 03 2015)
A Case Study Overcoming Marketing And R&D Obstacles...
Proceedings of SPIE (July 07 1976)
Veiling Glare In Photographic Systems
Proceedings of SPIE (October 29 1981)
Thales Angenieux 42 years of cine 35 mm zoom...
Proceedings of SPIE (February 18 2004)

Back to Top