1 October 1984 Optical Particle Counting, Sizing, And Velocimetry Using Intensity Deconvolution
D. J. Holve, K. D. Annen
Author Affiliations +
Abstract
In situ optical diagnostics have been more widely used in recent years for measurements in both research and industrial facilities. The subject of this paper is an in situ particle counting and sizing technique that uses the intensity deconvolution method. This technique is also capable of simultaneously measuring the velocity of a particle and therefore allows absolute particle concentrations to be obtained. The technique can be used in both the forward scatter and backscatter geometries. This paper first describes the technique and presents the theory of particle sizing by the intensity deconvolution method. An example of the successful measurement of particle size distributions in an industrial reactor using the backscatter configuration is given, and the results are discussed. Measurements using the forward scatter configuration of particle size distributions and velocities for coal/water slurry combustion are described. A discussion of the size resolution, accuracy, and error analysis of the technique is presented.
D. J. Holve and K. D. Annen "Optical Particle Counting, Sizing, And Velocimetry Using Intensity Deconvolution," Optical Engineering 23(5), 235591 (1 October 1984). https://doi.org/10.1117/12.7973342
Published: 1 October 1984
Lens.org Logo
CITATIONS
Cited by 40 scholarly publications and 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Particles

Deconvolution

Velocimetry

Backscatter

Combustion

Error analysis

In situ metrology

Back to Top