1 August 1985 Holographic Interferometry Applications In External Osteosynthesis
Author Affiliations +
Abstract
In order to maintain fragments of fractured bones in a state of immobilization, the use of an external rigid frame has proved to be very advantageous. Confronted by contradictory requirements, the conception of external fixation has, however, been a difficult task. The present paper aims to show, through three examples of varied bearings, the interest of holographic interferometry in external osteosynthesis. The first example deals with the mechanical behavior of a key element of the fixation device the ball joint submitted to realistic loads. The last two examples compare two models of ball joints as to their characteristics of rigidity and of resistance to slipping. Whereas in the former case holographic interferometry primarily fulfills the function of a prelude to the modelization work, in the latter cases it serves to formulate an engineering diagnostic. The findings relate to the remarkable elastic behavior of the ball joint, to the effectiveness of a lightened bowl design, and to the fact that cousin models may behave quite differently as to their resistance to slipping rotations of the bar. In comparison with other experimental methods, holographic interferometry appears to be very competitive and result-oriented and, as such, is expected to multiply applications in similar evaluation tasks.
P. Jacquot, P. K. Rastogi, L. Pflug, "Holographic Interferometry Applications In External Osteosynthesis," Optical Engineering 24(5), 245918 (1 August 1985). https://doi.org/10.1117/12.7973600 . Submission:
JOURNAL ARTICLE
7 PAGES


SHARE
Back to Top