1 December 1985 Microcomputer Based Digital Image Processing System Developed To Count And Size Laser-Generated Small Particle Images
Author Affiliations +
A microcomputer-based digital image processing system has been developed to count and size laser-generated small particle images. Processing rates of 5 to 600 frames per minute were achieved by utilizing a real-time digital image processor. Particles from 7 to 700 µm in the plane of focus were counted and sized. A major emphasis in this work was to determine the basic problems and limitations involved with using a digital image processing scheme to accurately size particles. Areas that were investigated include the effect of the threshold level on measured particle size, particle boundary diffraction gray-level gradients, and geometric nonlinearities introduced by the vidicon camera. A Laser Electro-Optics Ltd. calibration reticle containing simulated particles from 5.29 to 92.75 µm in diameter was used as the basis for an in-depth calibration process. It was determined that various inherent problems with image processing systems limit their accuracy unless compensation is made. Decalibration techniques were used to correct for these inaccuracies. After correction, an average error of less than 1.0% was found for 25 to 100 µm particles. A 2.8% error was found in the experimentally determined distribution of 52.8 µm polystyrene microspheres.
K. D. Ahler, K. D. Ahler, D. R. Alexander, D. R. Alexander, "Microcomputer Based Digital Image Processing System Developed To Count And Size Laser-Generated Small Particle Images," Optical Engineering 24(6), 241060 (1 December 1985). https://doi.org/10.1117/12.7973630 . Submission:


Three-dimensional imaging technique using optical diffraction
Proceedings of SPIE (February 10 2002)
Distortions in non-contact photonic systems
Proceedings of SPIE (April 17 2006)
The Numerical Stereo Camera
Proceedings of SPIE (October 28 1981)
Learning by research
Proceedings of SPIE (July 05 1999)

Back to Top