1 January 1986 Computer Simulation Of Thin Film Growth: Applying The Results To Optical Coatings
Author Affiliations +
Computer simulation of thin film growth has been used extensively to gain insight into the origin and nature of the microstructure of vapor-deposited thin films. Usually, however, no attempts are made to predict film properties other than column angle and film density from such simulations. The aim of our work is to derive quantitative data from computer simulations in order to be able to predict relevant properties of optical coatings. The deposition of 2500 to 25,000 particles has been simulated on different computers by random deposition of two-dimensional hard disks, using a simple relaxation scheme. Statistical analysis of the results yields quantitative data for the density, column angle, and column period. On the basis of these results, a simple model has been developed for the microstructure of a three-dimensional film. The birefringence and the shape of water-penetration fronts in evaporated optical coatings, predicted from this model, are confirmed by experiment.
M. Sikkens, M. Sikkens, I. J. Hodgkinson, I. J. Hodgkinson, F. Horowitz, F. Horowitz, H. A. Macleod, H. A. Macleod, J. J. Wharton, J. J. Wharton, } "Computer Simulation Of Thin Film Growth: Applying The Results To Optical Coatings," Optical Engineering 25(1), 250142 (1 January 1986). https://doi.org/10.1117/12.7973791 . Submission:


Simulation in thin film technology
Proceedings of SPIE (September 22 2015)
Computer Simulation Of The Growth Of Two-Element Films
Proceedings of SPIE (February 01 1988)
Thin-Film Microstructure Modeling
Proceedings of SPIE (November 19 1985)
Thin film morphology at low adatom mobility
Proceedings of SPIE (July 08 2001)
Effects of surface diffusion on thin film morphology a...
Proceedings of SPIE (November 30 1990)

Back to Top