1 March 1986 Improvements In Avalanche-Transistor Sweep Circuitry For Electro-Optic Streak Cameras
Author Affiliations +
Abstract
We have improved the performance of the avalanche-transistor deflector-driver (sweep) circuitry used in the high-speed, electro-optic streak camera at Lawrence Livermore National Laboratory. In the previous design for the sweep circuit, trigger-to-output delay time drifted on some cameras. This delay drift is a function of a somewhat randomly unstable breakdown voltage of some avalanche transistors. Both temperature and differences in manufacturing methods for transistors affect this instability. However, a significant improvement in system performance is achieved by long-term burn in and by selection of only the most stable transistors for the sweep circuit. The peak-to-peak sweep voltage has been increased about 80% by increasing the number of avalanche transistors in the string and raising the quality factor (Q) of the resonant circuit. The result is an improvement in sweep uniformity by a factor of approximately 2. Design equations for selecting components are given. Fast-recovery diodes are used to prevent undershoot and to keep the beam out of the intensifier field of view until after the intensifier is gated off. The sweep time range has been extended to over 100 ns.
S. W. Thomas, S. W. Thomas, R. L. Griffith, R. L. Griffith, W. R. McDonald, W. R. McDonald, } "Improvements In Avalanche-Transistor Sweep Circuitry For Electro-Optic Streak Cameras," Optical Engineering 25(3), 253465 (1 March 1986). https://doi.org/10.1117/12.7973844 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
RELATED CONTENT


Back to Top