1 September 1986 Surface Finish Measurements Of Diamond-Turned Electroless-Nickel-Plated Mirrors
Author Affiliations +
Abstract
Surface roughness data are presented for a matrix of diamond-turned electroless nickel samples having a combination of six phosphorus contents and four heat treatments. Roughness measurements were conducted with commercial optical and stylus profilers (WYKO and Talystep). The results are discussed in terms of the material composition and heat treatment, plus other factors having an observed influence on the surface roughness. For the optimum material properties, full-length (665 itm) 20x WYKO scans yielded values of better than 10 A rms after correction for instrument roll-off.
John S. Taylor, John S. Taylor, Choi K. Syn, Choi K. Syn, Theodore T. Saito, Theodore T. Saito, Robert R. Donaldson, Robert R. Donaldson, } "Surface Finish Measurements Of Diamond-Turned Electroless-Nickel-Plated Mirrors," Optical Engineering 25(9), 251013 (1 September 1986). https://doi.org/10.1117/12.7973947 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT

Aluminum alloy AA 6061 and RSA 6061 heat treatment for...
Proceedings of SPIE (September 29 2013)
Diamond Turning Optical Surfaces On Electroless Nickel
Proceedings of SPIE (October 26 1978)
Use of beryllium for the VLT secondary mirror
Proceedings of SPIE (November 10 1996)
Large stable aluminum optics for aerospace applications
Proceedings of SPIE (September 23 2011)
Improved cryogenic aluminum mirrors
Proceedings of SPIE (September 16 1998)

Back to Top