1 November 1987 New Servo Method With Eccentricity Correction Circuit
Author Affiliations +
Optical Engineering, 26(11), 261140 (1987). doi:10.1117/12.7974207
To shorten the access time of optical disk equipment, a small optical head and an eccentricity correction circuit are required. This paper describes both a small optical head with a combined prism and a roof-shaped prism and an eccentricity correction method with synchronized sine wave. Two newly developed prisms make it possible to form the optical head by using only six optical parts. Eccentricity correction is performed by moving the actuator according to the synchronized sinusoidal correction signal. The amplitude and phase of the correction signal are matched to those of the track movement by a microcomputer. This eccentricity correction can reduce a 200 µm eccentricity to 10 µm , improve tracking ability, and shorten the random access time.
Yukio Fukui, Yoshio Miura, Motoyuki Suzuki, "New Servo Method With Eccentricity Correction Circuit," Optical Engineering 26(11), 261140 (1 November 1987). https://doi.org/10.1117/12.7974207


Two-Beam Optical Head
Proceedings of SPIE (January 14 1987)
High-Speed Servo Technology For Optical Disk Drive
Proceedings of SPIE (June 02 1988)
Measuring Method Of Optical Disk Mechanical Characteristics
Proceedings of SPIE (January 14 1987)
Study and analysis of a new servo system in an...
Proceedings of SPIE (February 07 2001)
A new optical disk driver fine seek algorithm based on...
Proceedings of SPIE (January 03 2005)

Back to Top