1 February 1988 Layered Synthetic Microstructure X-Ray Mirror Focusing Instrument: Bent Silicon Wafer Substrate
Author Affiliations +
The use of layered synthetic microstructures (LSMs) in a diagnostic instrument for focusing x rays from advanced magnetic fusion energy plasmas has been proposed. This paper describes a single-channel prototype of an eventual 20-channel instrument. LSMs are deposited on eight silicon wafer substrates, which provide bendable x-ray mirrors. Each mirror is bent in a four-bar device, and each is subsequently aligned to approximate an off-axis portion of a paraboloid at whose focus is placed a silicon surface barrier detector. The x-ray flux-collecting function of a single channel, together with the low resolution characteristics of the LSM passband and the plasma source geometry, allows for an easily obtained silicon wafer surface figure accuracy. This paper also describes the bending of the LSM mirrors and the installation and alignment of the prototype.
J. A. Penkethman, J. A. Penkethman, } "Layered Synthetic Microstructure X-Ray Mirror Focusing Instrument: Bent Silicon Wafer Substrate," Optical Engineering 27(2), 270299 (1 February 1988). https://doi.org/10.1117/12.7976652 . Submission:


Development of hard x-ray optics
Proceedings of SPIE (December 31 1991)
Recent advances in indirect drive ICF physics at CEA
Proceedings of SPIE (April 22 2001)
X-Ray Instrumentation in the LLL Laser-Fusion Program
Proceedings of SPIE (December 29 1976)
Back-up technologies for IXO
Proceedings of SPIE (April 30 2009)
Beam diagnostics challenges for future FELs
Proceedings of SPIE (May 14 1997)

Back to Top