1 July 1989 Asynchronous Transfer Mode Packet Video Transmission System
Author Affiliations +
A prototype point-to-point packet transmission system carrying a DS-3 rate, NTSC-quality digital video signal has been made and successfully demonstrated. Fixed bit-rate video signals are transported in packet form using the asynchronous transfer mode (ATM) technique. A packet assembler integrates the transmit terminals' information into an ATM data stream suitable for application to a broadband ISDN. A packet disassembler distributes the incoming data to the proper receive terminals. The flexible and modular architecture of both the packet assembler and disassembler allows service equipment to be physically remote and provides easy expansion or reconfiguration of the service channels in the future. Service clock information not carried by the network is recovered at the receive end by use of a digital phase-locked loop.
H. Jonathan Chao, Cesar A. Johnston, "Asynchronous Transfer Mode Packet Video Transmission System," Optical Engineering 28(7), 287781 (1 July 1989). https://doi.org/10.1117/12.7977033


SVGA AMOLED with world's highest pixel pitch
Proceedings of SPIE (May 18 2006)
Low Cost Smart Camera
Proceedings of SPIE (June 09 1986)
Deco video video editing and viewing browser enables to...
Proceedings of SPIE (January 22 2008)
Variable Bit Rate Video Coding In Atm Networks
Proceedings of SPIE (October 25 1988)

Back to Top