1 November 1990 Laser radar beam steering mirrors
Author Affiliations +
Abstract
The structural aspects of developing a flat laser radar beam steering mirror for optical discrimination of an array of spaceborne targets at 10.6 ?m are discussed. Results of trade studies to determine feasible design concepts capable of meeting the system performance goals during steering are included. Aperture diameters between 0.5 and 2 m were studied for three principal structures: (1) a thin glass sandwich coupled to a deep backup structure, (2) a full-depth beryllium sandwich, and (3) a fulldepth graphite epoxy sandwich. The results of computer simulations of the structural performance of each of these concepts are presented, and fabrication efforts in support of these concepts are described. These studies demonstrate that lightweight, dimensionally stable flat mirrors can be fabricated with present technology. Aluminum-clad graphite/epoxy mirrors were successfully manufactured within 0.5 pm rms of a flat surface, and initial test results indicate dimensional stability after several thermal cycles. A low cost, uncomplicated method to manufacture low thermal expansion aluminum-clad graphite/epoxy tubes as backup structural members for large space-based optics was also developed. Further investigations are warranted to determine the dynamic tensile strength of glass, to develop thermal distortion compensation methods for metal mirrors, and to improve the dimensional and temporal stability of clad graphite/ epoxy mirrors.
Steven E. Forman, John A. Sultana, Raymond A. LeClair, "Laser radar beam steering mirrors," Optical Engineering 29(11), (1 November 1990). https://doi.org/10.1117/12.55736 . Submission:
JOURNAL ARTICLE
9 PAGES


SHARE
RELATED CONTENT

Mounting and alignment of IXO mirror segments
Proceedings of SPIE (July 29 2010)
Dimensional stability: an overview
Proceedings of SPIE (November 01 1990)
Design comparison of glass and beryllium AMSD mirrors
Proceedings of SPIE (March 06 2001)

Back to Top