1 October 1991 Endoscopic measurement using radial metrology with digital correlation
Author Affiliations +
Radial metrology combines standard optical measurement techniques with a unique panoramic annular lens (PAL) system to study material properties and deformations on the inner surfaces of the cavities found, for example, inside pipes, tubes, and boreholes. A PAL profilometer using speckle metrology is analyzed and the equations obtained from the analysis are used to calibrate the PAL profilometer when it is used to profile the inner surface of a cylindrical pipe and to measure the deformation of the pipe when it is subjected to diametral compression.
Donald R. Matthys, Donald R. Matthys, John A. Gilbert, John A. Gilbert, Pal Greguss, Pal Greguss, } "Endoscopic measurement using radial metrology with digital correlation," Optical Engineering 30(10), (1 October 1991). https://doi.org/10.1117/12.55965 . Submission:


Radial Metrology With A Panoramic Annular Lens
Proceedings of SPIE (December 19 1989)
Laser surface profilometer with subangstrom resolution
Proceedings of SPIE (May 31 1992)
Developments In Radial Metrology
Proceedings of SPIE (January 15 1989)
A speckle texture image generator
Proceedings of SPIE (September 14 2006)

Back to Top