1 May 1991 Intensity distribution transformation for rotationally symmetric beam shaping
Author Affiliations +
Holography and optical processing often require coherent input beams with intensity distributions that are different from the usual Gaussian distribution of a laser. Aspherical lenses are used to perform general beam shaping in order to obtain the required intensity distributions. Computer-generated holograms (CGHs) can also be used for beam shaping. In this paper the computational procedure for CGHs, which implements a rotationally symmetric transformation, is supplied. The computational procedure consists of two steps. In the first step a transformation equation is computed from the two known intensity distributions by using an integral equation. This transformation equation will transform the available intensity distribution into the required intensity distribution. It is substituted into a differential equation from which a phase function is cornputed, and is then encoded as a CGH. Two CGHs are required to perform the transformation. The first one diffracts the light to form the desired intensity distribution at a given distance behind the CGH. At that position the second CGH is placed to cancel the diffraction in order to retain the desired intensity distribution. The resulting intensity distribution remains unchanged from then on except for the effect of the diffraction of the distribution itself. General intensity distributions have been implemented with CGHs produced with this technique, and the results are presented in this paper.
Filippus S. Roux, Filippus S. Roux, } "Intensity distribution transformation for rotationally symmetric beam shaping," Optical Engineering 30(5), (1 May 1991). https://doi.org/10.1117/12.55836 . Submission:


New method of making HOE by copying CGH on NGD
Proceedings of SPIE (November 30 1991)
Inverse grating diffraction problems
Proceedings of SPIE (September 30 1991)
Alignment of an optical axis to a rotating mechanical axis...
Proceedings of SPIE (February 04 1996)

Back to Top