1 May 1991 Site-certification imaging sensor for the exploration of Mars
Author Affiliations +
Abstract
A "time dilation" push-broom imaging charge-coupled device (CCD) sensor is being considered for certification of landing and roving sites for the exploration of Mars. It will be used to certify several 10 x 10 km candidate sites and to identify rocks and holes of 1 m or larger at those sites, using an optical sensor with 0.25 m resolution. This will require a high-resolution large-aperture camera and a camera-pointing system designed for high accuracy and stability. To reduce the data rate and increase the exposure time, the imaging time will be stretched out by a factor of eight over the time required to fly directly over the imaged site. Six parallel data storage strings will be used to reduce the data acquisition rate, allowing each string to process a manageable 25 Mb/s.
Marija Strojnik, Marija Strojnik, Yaujen Wang, Yaujen Wang, James E. Randolph, James E. Randolph, Juan A. Ayon, Juan A. Ayon, } "Site-certification imaging sensor for the exploration of Mars," Optical Engineering 30(5), (1 May 1991). https://doi.org/10.1117/12.55842 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT


Back to Top