1 August 1992 Standard for surface damage
Author Affiliations +
A parametric method for the objective measurement of surface damage such as digs and scratches on optical components is described and is intended for use with the new British Standard 4301 (1991). By a comparison of image visibilities of defects with line and spot standards, scratches and digs can be quantified in terms of their line-equivalent widths and spot-equivalent diameters. The codes used on optical drawings are described and guidelines for surface damage thresholds are discussed. The preferred equipment to aid the various stages of inspection and measurement is described and aflow diagram illustrating atypical system for the quality control of transmitting and reflecting components is presented.
Lionel R. Baker, Lionel R. Baker, } "Standard for surface damage," Optical Engineering 31(8), (1 August 1992). https://doi.org/10.1117/12.58842 . Submission:


British Standard On Surface Flaws
Proceedings of SPIE (December 20 1989)
Subjective Versus Objective Methods For Surface Inspection
Proceedings of SPIE (October 13 1986)
Objective Standards For Surface Flaws
Proceedings of SPIE (April 11 1989)
Surface damage metrology: precision at low cost
Proceedings of SPIE (November 11 2002)
Standard for surface damage
Proceedings of SPIE (April 01 1992)

Back to Top