1 August 1993 Order-sorting filter transmittance measured with an array detector
James B. Heaney, Scott E. Bradley, Vincent T. Bly, Audrey J. Ewin, Anh T. La
Author Affiliations +
Abstract
The simultaneous measurement of the spectrally and spatially variant transmittance of a linear variable order-sorting filter in a manner that closely resembles its conditions of actual use is described. The transmittance of a prototype order-sorting filter was measured in the 400- to 880-nm wavelength region by illuminating it with the output beam of a spectrophotometer while the filter was attached to the front of a 30 x 32 pixel silicon array detector. The filter was designed to be used in the output beam of a grating spectrometer to prevent the dispersal of higher diffracted orders onto an array detector. Areas of the filter that were spatially matched to the corresponding detector pixel column had measured peak transmittances of about 90% that were uniform to within ±1.5% along a given column. Transmittances for incident wavelengths shorter than the desired bandpass, corresponding to the order overlap region, were measured in the 3 x 10-3 range. Line spread function measurements made with the array detector indicated no significant beam spreading caused by inserting the filter into the beam.
James B. Heaney, Scott E. Bradley, Vincent T. Bly, Audrey J. Ewin, and Anh T. La "Order-sorting filter transmittance measured with an array detector," Optical Engineering 32(8), (1 August 1993). https://doi.org/10.1117/12.143302
Published: 1 August 1993
Lens.org Logo
CITATIONS
Cited by 1 patent.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transmittance

Optical filters

Sensors

Detector arrays

Reflectivity

Linear filtering

Spectrophotometry

Back to Top