1 November 1993 Analysis of beam steering with decentered microlens arrays
Author Affiliations +
Abstract
A cascade of microlens arrays that are decentered with respect to each other is one potential method for beam steering; the magnitude of the steering depends on the amount of decenter. A simple, heuristic geometric analysis is presented that suggests that the output of the arrays is analogous to a blazed grating. The periodic nature of the exiting wavefront restricts allowed steering angles to values determined by the element-to-element spacing of the microlens arrays. The efficiency of steering into a desired mode of the grating is determined both by the amount of decenter of the microlens arrays and the fill factor at the output of the arrays. It is shown that maximum fill factor is desired, which can be achieved through the addition of a microlens array that acts like a field lens. Assumptions are identified under which the grating nature of the output can be predicted using Fresnel diffraction theory. Future work in the area of microlens beam steering is suggested.
Edward A. Watson, Edward A. Watson, } "Analysis of beam steering with decentered microlens arrays," Optical Engineering 32(11), (1 November 1993). https://doi.org/10.1117/12.148100 . Submission:
JOURNAL ARTICLE
6 PAGES


SHARE
RELATED CONTENT

Micro-optic laser beam scanner
Proceedings of SPIE (December 14 1993)
Optical design considerations for agile beam steering
Proceedings of SPIE (June 07 1994)
Binary Micro Optics: An Application To Beam Steering
Proceedings of SPIE (May 05 1989)
Adaptive laser beam steering with micro-optical arrays
Proceedings of SPIE (October 09 2007)

Back to Top