1 November 1993 Coherent versus incoherent ladar detection at 2.09 μm [also Erratum 33(9)3118(Sep1994)]
Author Affiliations +
Optical Engineering, 32(11), (1993). doi:10.1117/12.148109
Abstract
A 2.09-μm ladar system is built to compare coherent to incoherent detection. The 2.09-μm wavelength is of interest because of its high atmospheric transmission and because it is eyesafe. The 2.09-μm system presented is capable of either a coherent or incoherent operational mode, is tunable in a small region around 2.09 μm, and is being used to look at the statistical nature of the ladar return pulses for typical glint and speckle targets. To compare coherent to incoherent detection the probability of detection is investigated as the primary performance criterion of interest. The probability of detection is dependent on both the probability of false alarm and the probability density function, representing the signal current output from the detector. These probability distributions are different for each detection technique and for each type of target. Furthermore, the probability of detection and the probability of false alarm are both functions of the dominating noise source(s) in the system. A description of the theoretical expectations of this system along with the setup of the ladar system and how it is being used to collect data for both coherent and incoherent detection is presented.
Jay Alan Overbeck, Martin B. Mark, Scott H. McCracken, Paul F. McManamon, Bradley D. Duncan, "Coherent versus incoherent ladar detection at 2.09 μm [also Erratum 33(9)3118(Sep1994)]," Optical Engineering 32(11), (1 November 1993). http://dx.doi.org/10.1117/12.148109
JOURNAL ARTICLE
9 PAGES


SHARE
KEYWORDS
Target detection

Signal detection

LIDAR

Sensors

Interference (communication)

Signal to noise ratio

Speckle

Back to Top