1 March 1993 Stabilized and accelerated speckle strain gauge
Author Affiliations +
Abstract
We have improved the stability and temporal response of the laser speckle strain gauge that detects strain from speckle displacement caused by surface deformation. In the gauge, a narrow laser beam is incident on a diffuse surface, and speckle patterns appearing in the light scattered through the symmetrical angles are detected by a pair of linear image sensors. Speckle displacement is derived by a real-time correlator as the peak of the cross correlation between the current frame and a reference frame of the sensor driven at 1000 frames per second. The reference frame is fixed until the correlation peak becomes lower than a threshold. Using a pair of image sensors, followed by the correlators, and a laser of output power of a few tens of milliwatts, we could measure dynamic strain of polymer films at the frequency between a fraction of hertz and 100 Hz. The resolution of the gauge, which only depends on geometry of the optical system and the sensor pitch, is a few tens of microstrains. The upper limit of the measurement can be extended arbitrarily because small incremental strain is integrated.
Ichirou Yamaguchi, Ichirou Yamaguchi, Tamiki Takemori, Tamiki Takemori, Koichi Kobayashi, Koichi Kobayashi, } "Stabilized and accelerated speckle strain gauge," Optical Engineering 32(3), (1 March 1993). https://doi.org/10.1117/12.61043 . Submission:
JOURNAL ARTICLE
8 PAGES


SHARE
RELATED CONTENT

A Stabilized Laser Speckle Strain Gauge
Proceedings of SPIE (July 30 1989)
Stabilized And Accelerated Speckle Strain Gauge
Proceedings of SPIE (April 24 1990)
Effect of deadtime in imaging detectors
Proceedings of SPIE (June 30 1990)

Back to Top